Resurrect Your Trim From a Faded Fate With Solution Finish!

Plastic is one of the most susceptible surfaces on vehicles today, especially when it comes to UV damage. Harsh UV rays will fade out black plastic trim to the point that it looks more like a greyish ghost of its former self. While preventive protectants will save your trim from this faded fate, sometimes it’s already too late. If that’s the case, there is a much better solution than the oily coverup products you’ll find on the market today. That solution is Solution Finish.

Infusing Carbon – The second chemical operation being performed is the infusion of black carbon into the microscopic pores of the plastic. The insertion of black carbon back into the material is what brings the plastic back to its natural appearance.

Leaving Antioxidants and Light Stabilizers – lastly, to add longevity and performance to the application Solution Finish utilizes antioxidants and light stabilizers designed to prevent UV radiation for causing further damage to the trim.

Make sure you dry the surface completely before moving forward with the application and be sure to wear protective gloves to prevent any staining on your skin. Vigorously shake the bottle to ensure the product is thoroughly mixed before application. Once done, give it one more shake to be sure and then apply a small amount of product to a microfiber applicator. About a dime-sized amount is plenty.

Start working the product into the plastics and all crevices. Be sure to work the product in a straight, even motion to ensure even product distribution. You’ll notice that Solution Finish immediately absorbs into the plastic. Allow four hours for the product to cure.

Autogeek.com, 17414 Tiller Ct, Westfield, IN, 46074, USA. 2026

You’re receiving this email because you’ve signed up to receive Autogeek's Newsletters. If you’d prefer not to receive updates, you can Unsubscribe. Want to update your preferences? Click here.

View in Your Browser