How to Install a Bed Scrunchie

Sleeping with tight sheets is simpler than you think. Here’s how to attach your Bed Scrunchie:

A: Lay fitted sheet on bed with the elastic side facing up.

B: Attach clips 10 - 12 inches from the right and left of the corner seams

C: Snap the clips into place and make the sure buckle is centered at the foot of the bed.

A: Flip the fitted sheet over.

B: Place the fitted sheet on the mattress as you normally would, starting at the corners. 

C: Be sure to grip the Bed Scrunchie and sheet together and place them both fully underneath the mattress.

A. Slide the wheel lock up to the buckle.

B. Tighten the rope by pulling it in opposite directions.

C. Secure the rope safely underneath the mattress.

D. Sleep tight, all night.

Mistakes to avoid

1. Don’t tuck multiple corners in at the same time. Make sure you’re putting your sheet on one corner at a time, allowing the Bed Scrunchie and sheet to go under each corner of the bed.
2. Don’t forget the last step.The Bed Scrunchie only works if the rope is pulled tight!
3. Don’t put the clips directly on the corners of your sheet! It works much better if the clips are spaced out evenly along the entire sheet.

See, that wasn’t too hard? Sleeping with tight sheets is much easier than you thought.